New3.6HP Boat Engine Upgrade 52CC 2 Stroke Heavy Duty Outboard Motor CDI System
3.6HP 2Stroke 52CC Heavy Duty Outboard Motor Boat Engine w/Air Cooling System US
Description
Displacement：52CC
Overall length: 92CM
Overall widteh: 36.5cm
Overall height: 22cm
Transom height: 42cm
Full throttle perating range: 4000-5000r/min
Maximum output: 2.6kw(3.6HP)
Speed: 20km/h(four people)
Type: 2-stroke
Ignition system: CDI system
Starting system: Manual start
Staring carburetion system: Choke start
Propeller mark: 7-1/45-A(inch)
The engine and the propeller ratio: 2:1
Recommended fuel: Regular unleaded gasoline
Fuel to oil ratio: 30:1
Gear ratio: 27/13
Maximum speed: 12 km / h
Built-in fuel tank: 1.3L
Fuel consumption per hour: 1.5L
Packadge
1*Boat Motor
1*Instruction manual
1*Oil pot
1*funnel
1Tool kit
When at normal cruising,the appearence of the senveth picture. Falling back the boat,  the appearence of the outboard motor likes the eighth picture . Falling back the boat, you should drive slowly otherwise the boat will not stable. The outboard motor backet can revolve 360. Only in simple let the engine revolve 180 and the operation handle face back, the boat can fall back to drive.
Announcements   After in the sea water or turbid water cruising   1.Use the fresh water cleaning the outboard motor   2.With the moderate velocity circulating the engine, cool off the water chanel with fresh water.   3. Before completely running out cooling water, don't put the outboard motor outside. Otherwise the water cam pass the exhaust port to enter the air cylinder, from that will cause the engine breakdown.   4. The engine should deposit in the aridity and ventilated well place, avoid exposing directly in the sunshine.   5. Before the long term storing,you should run out of the gasoline in the fuel tank.